A&D Ej Series Compact Balance EJ-2000 - Manual (Page 23)

21
Class Item
Param-
eter
Description
0 ACAI disabled aCai
ACAI function
Š 1 ACAI enabled
If “0” is set,
no additional samples
required.
Š 0 1 d
1 1/10 d
Umin
Minimum unit
weight
2 total sample weight ≥5d ( ** )
d = the minimum
display division
Š 0 10 pcs
1 25 pcs
2 50 pcs
3 100 pcs
smpl
Sample number
4 5 pcs
The number of
samples shown
first when entered
into the unit weight
storing mode
Š 0 Water temperature ldin
Liquid density input 1 Liquid density
The way to input
liquid density.
0 Always off
1 Turns off after 5 seconds
2 Turns off after 10 seconds
Š 3 Turns off after 30 seconds
4 Turns off after 60 seconds
func
ltUp
LCD Backlight
control
5 Always on
To control how the
LCD backlight turns
off. Weight change
or key operation will
turn the backlight
on.
CpHi Comparator upper limit Setting the upper limit value
Cplo Comparator lower limit Setting the lower limit value
See
“6. COMPARATOR”
Unit Weighing units to be displayed Sets to display units See “8-4. Storing
weighing units”
id ID number for GLP output Sets the ID number See “10. ID
NUMBER AND GLP”
Š Factory setting
( ** ) Even if the weight display is “5d”, the sample weight may not be accepted.
This is because the weight display data is rounded off internally.