Aalborg Vortex Insertion - Manual (Page 21)

16
Figure 5.1: Vortex meter first Banner Screen
Figure 5.2: Vortex meter second Banner Screen
Figure 5.3: Vortex meter initial PI Screen
Based on flow meter configuration (with or without Temperature/Pressure
option), different parameters may be displayed in the Process Information (PI)
screen by pressing the Up or Dn pushbuttons.
Process Information screens can be configured to be static or dynamic (see
Paragraph 5.3.11 “Display Menu”). Using Screen Mask settings user can enable
(unmask) or disable (mask) up to 13 different process variable combinations (see
Figure 5.4). In the static mode pressing Up button, pages through the PI screens
in the forward direction, pressing Dn button, pages through the PI screens in the
reverse direction. When the last PI screen is reached, the firmware “wraps
around” and scrolls to the initial PI screen once again.
In the dynamic mode firmware initiates automatic screen sequencing with user
adjustable screen Cycle Time (see Paragraph 5.3.11.2 “Display Menu”). When the
last PI screen is reached, the firmware “wraps around” and scrolls to the initial PI
screen once again.
AALBORG VORTEX
SMART FLOW METER
VXW10L-44AB-L2D4
Fw: A001 Tbl: A001
325.3 litr/min
T1: 60639.3 litr
NOTE: Actual content of the LCD screen may vary depending on the
model.
,