Aalborg Vortex Insertion - Manual (Page 93)

88
COMMAND
NAME
DESCRIPTION
NO.
COMMAND SYNT
A
X
COMMAND
ARGUMENT 1
ARGUMENT 2
ARGUMENT 3
ARGUMENT 4
RESPONSE
Units of measure
Set units of measure for flow rate, temperature, pressure, density
, and totalizer reading.
Note: The units of the totalizer output are not per unit time. For V
o
lumetric user defined
units: k-Factor value represents conversion value from L/min. For Mass user defined units: k-Factor value represents con- version value from g/min. T
ime base argument:
S - seconds M – minutes H – hours D- days Density argument: Y - use density N – do not use density Temperature, Pressure and Density EU only supported if T/P hardware is installed. Igal - Imperial Gal MilL – million liters Bbl - Barrels
15
U
V
% (% F
.S.)*
UV
:%
litr/sec
UV
: litr/sec
litr/min
UV
: litr/min
litr/hr
UV
: litr/hr
litr/day
UV
: litr/day
m^3/sec
UV
: m^3/sec
m^3/min
UV
: m^3/min
m^3/hr
UV
: m^3/hr
m^3/day
UV
: m^3/day
f^3/sec
UV
:f^3/sec
f^3/min
UV
:f^3/min
f^3/hr
UV
:f^3/hr
f^3/day
UV
:f^3/day
gal/sec
UV
:gal/sec
gal/min
UV
:gal/min
gal/hr
UV
:gal/hr
gal/day
UV
:gal/day
Igal/sec
UV
:Igal/sec
Igal/min
UV
:Igal/min
Igal/hr
UV
:Igal/hr
Igal/day
UV
:Igal/day
MilL/sec
UV
:MilL/sec
MilL/min
UV
:MilL/min
MilL/hr
UV
:MilL/hr
MilL/day
UV
:MilL/day
bbl/sec
UV
:bbl/sec
bbl/min
UV
:bbl/min
bbl/hr
UV
:bbl/hr
bbl/day
UV
:bbl/day
VOLUSER (user defined)
<k-Factor value>
<T
ime Base>
UV
:VOLUSER,<F>,<T>
No Argument (status)
UV
:<EU name>