Aalborg Vortex Insertion - Manual (Page 99)

94
COMMAND
NAME
DESCRIPTION
NO.
COMMAND SYNT
A
X
COMMAND
ARGUMENT 1
ARGUMENT 2
ARGUMENT 3
ARGUMENT 4
RESPONSE
FFT DSP Settings
Sets/Reads FFT DSP related variables. FFT Sample/Second: 0 – Automatic 1 – 8000 samples/sec 2 – 4000 samples/sec 3 – 2000 samples/sec 4 – 1000 samples/sec 5 – 500 samples/sec
21
FT
M FFT Algorithm Mode: E- Enable D- Disable
<New V
alue>
E or D
FTM:<value> Example: FTM:E
No Argument (Ret. Current settings)
FTM:<value> Example: FTM:E
T FFT T
rigger Level:
0 – Auto [1-4095] - Manual
<new value> [0-4095]
FTT
:<value>
Example: FTT
:60
No Argument (Ret. Current settings)
FTT
:<value>
Example: FTT
:60
S FFT Sample/Second (manufacture only
, do
not change*)
<new value> [0-5]
FTS:<value> Example: FTS:1
No Argument (Ret. Current settings)
FTS:<value>,<SF> Example: FTS:1,1000
D FFT Damping (manufacture only
, do
not change*)
<New V
alue>
E or D
FTD:<value> Example: FTF:D
No Argument (Ret. Current settings)
FTD:<value> Example: FTF:D
N FFT Minimum Noise Threshold for Auto (manufacture only
, do
not change*)
<new value> [0-5000]
FTN:<value> Example: FTN:500
No Argument (Ret. Current settings)
FTN:<value> Example: FTN:500
A Attenuation Mode and Ta
rget Level
<value> A or M
<value> [0-4095]
FT
A:<value>,<value>
Example: FT
A:M,1000
No Argument (Ret. Current settings)
FT
A:<value>,<value>
Example: FT
A:M,1000