Avaya 3100 - Manual (Page 25)

Configuring Avaya 3100 MC - Client for Windows Mobile
Avaya 3100 Mobile Communicator - Client for Windows Mobile User Guide 25
Configuring Avaya 3100 MC - Client for
Windows Mobile
This section contains the following topics:
• “Initial configuration” on page 25
• “Advanced Configuration settings” on page 27
Initial configuration
The first time you start Avaya 3100 MC - Client for Windows Mobile, you are prompted to enter your basic
log on information and then log on to the system. After you log on, additional configuration settings are
automatically downloaded from the Avaya 3100 Mobile Communicator Gateway and you can begin using
the Avaya 3100 MC - Client.
Completing the initial configuration of the Avaya 3100 MC - Client
1. Obtain your basic logon settings from your system administrator.
2. Connect your Windows mobile device to the cellular network.
3. On your Windows mobile device, select Start, Programs, Mobile Console.
The Login information pane appears.
4. Complete the fields using the information listed in Table 8 "Required parameters" on page 25 .
Table 8: Required parameters
Parameter Description
Login Name Enter your account user name on the Avaya 3100
Mobile Communicator Gateway
Login
Password Enter your account password on Avaya 3100 Mobile
Communicator Gateway.
Primary Server
IP/Host Enter the IP address or fully qualified domain name
of the primary Avaya 3100 Mobile Communicator
Gateway external network interface.
Format: <IP address | FQDN>
Note: Do not enter a complete URL.
Primary Server
Port Enter the port number used for client connections
on the primary Avaya 3100 Mobile Communicator
Gateway external network interface. The port
number varies depending on the connection type.
For example, an HTTPS connection typically
requires 8443 while an HTTP connection requires
8080.