Avaya 3100 - Manual (Page 46)

Advanced functions
46 NN42030-107 Avaya 3100 Mobile Communicator 3.1 Standard 03.05 October 2010
Figure 7: Direct outbound mode.
Call-me-First mode
In Call-me-First mode, your calls are completed in two steps. First, the enterprise telephony system calls
you. After you answer, the system calls the other party. See
Figure 8 "Call-me-First mode" on page 46 .
Figure 8: Call-me-First mode
Call Intercept
The Avaya 3100 Mobile Communicator can intercept calls made from the native device dialer, so that calls
can go through the Avaya 3100 Mobile Communicator Gateway. Use the Options pane to control the use
of the native device dialer. The Options menu displays the status of the feature. Select the Call Intercept
entry to toggle the feature.
• When Call Intercept is on displays, the Avaya 3100 Mobile Communicator Gateway handles all calls
(client of native dialer) made from your Windows Mobile device.
• When Call Intercept is off displays, native dialer calls route through your Windows Mobile device
without Avaya 3100 Mobile Communicator Gateway interaction.
Calling individuals
The following options are available for calling an individual:
• “Dialing a number” on page 46
• “Calling from the Buddy list” on page 49
Dialing a number
Place a call by dialing an extension or telephone number.