Avaya 3100 - Manual (Page 29)

Configuring Avaya 3100 MC - Client for Windows Mobile
Avaya 3100 Mobile Communicator - Client for Windows Mobile User Guide 29
4. Select Done.
Call settings
Use the Call Settings pane to configure your call screening mode, network roaming mode (if applicable),
and default prefixes.
Configuring your call settings
1. Select Menu, Logout.
Device Standby -
Enable If this check box is selected, your Windows
mobile device enters standby mode whenever
it is switched off (the power button is pressed
or the activity timer expires).
In standby mode, the backlight, touchscreen
and audio are off, but the system remains
active and the Avaya 3100 MC - Client can
still receive calls and messages. If you clear
this check box, your Windows mobile device
powers down and is unable to receive calls
and messages.
You can save power by turning off your
device, yet still be able to use the Avaya 3100
MC - Client when necessary. Enabling this
feature also allows you to turn the device off, if
it is online.
Device Standby -
Turn
WiFi radio off is WiFi
lost for < x > minutes
Specify the length of time (1 to 120 minutes)
that the device must remain unregistered on
the WiFi network before the WiFi radio is
turned off.
Enabling this feature saves power when you
are outside of WiFi range, such as when you
are traveling or at home.
Device Standby -
Turn device off if
offline for <x>
minutes You can specify the length of time (from 1 to
120 minutes) that the Avaya 3100 MC - Client
must be offline, either because you are logged
off or the Avaya 3100 Mobile Communicator
Gateway is unreachable, before the device
enters standby mode.
In standby mode, most functions are turned
off, but the Avaya 3100 MC - Client can still
receive calls and messages.
Enabling this feature saves power when you
are outside cellular range (offline), for
example, when you are in a remote
geographic area or in an elevator.
Table 9: Advanced pane fields
Field Description