Anthem Audio D2 - Manual (Page 29)

21
3.2 SET TIME / TIMERS
The time and day, plus 6 different timers are set in this menu. The timers in the processor are like an alarm
clock, but allow two different timer settings for each of MAIN, ZONE2, and ZONE3.
To set Time and Day:
• Enter the setup menu. Go to SET TIME / TIMERS and press SELECT.
• Press the button until you reach FORMAT.
• Use the buttons and choose 12 Hr or 24 Hr.
• Press the button to go to TIME.
• Press SELECT. “12” or the current hour will be highlighted in red.
• Use the Master Control Knob or the buttons to set the current hour.
• Press the button. “00” or the current minutes will be highlighted.
• Use the Master Control Knob or the buttons to set current minutes.
• Press BACK to return to the menu line.
• Press the button to go to DAY then use the buttons to set the current day.
All Timers:
This allows you to simultaneously “Enable” or “Disable” all Timers for MAIN, ZONE2, and ZONE3.
Highlighting SET MAIN TIMERS then pressing SELECT displays this menu:
2. SET TIME / TIMERS
a. FORMAT: 12 Hr
b. TIME: 12:00 AM
c. DAY: Sunday
d. ALL TIMERS: Disabled
e. SET MAIN TIMERS
f. SET ZONE2 TIMERS
g. SET ZONE3 TIMERS
2e. SET MAIN TIMERS
a. --- TIMER 1: Off ---
b. WEEKDAY ON: 8:00 AM
c. WEEKDAY OFF: 11:00 PM
d. WEEKEND ON: 10:00 AM
e. WEEKEND OFF: 11:00 PM
f. SOURCE: Last Stn
g. ON-VOLUME: -35.0 dB
h. --- TIMER 2: Off ---
i. WEEKDAY ON: 8:00 AM
j. WEEKDAY OFF: 11:00 PM
k. WEEKEND ON: 10:00 AM
l. WEEKEND OFF: 11:00 PM
m. SOURCE: Last Stn
n. ON-VOLUME: -35.0 dB
3. SETUP
continued …