Anthem Audio D2 - Manual (Page 30)

22
3. SETUP
continued …
Timer Options:
There are two Timers for Main and each Zone to allow greater flexibility. You can set week and weekend
on/off times twice – once for the morning and again for the evening, for example.
Using the buttons, TIMER 1 and TIMER 2 choices are:
• Off – Timer is disabled.
• Week – Timer operates from Monday to Friday.
• Wkend – Timer operates on Saturday and Sunday.
• Wk+Wkend – Timer operates every day.
On and Off Times:
Auto-on/off times are entered for:
T1 or T2 WEEKDAY ON: Sets the Monday to Friday turn-on time.
T1 or T2 WEEKDAY OFF: Sets the Monday to Friday turn-off time.
T1 or T2 WEEKEND ON: Sets the Saturday and Sunday turn-on time.
T1 or T2 WEEKEND OFF: Sets the Saturday and Sunday turn-off time.
Timers may also be set to only turn on or only turn off (see Example 2) – this way, the processor can be set
to turn on automatically, and it won’t turn off until you turn it off manually.
If the processor is already on, Timer On settings are ignored to ensure that source and volume are not
changed while in use.
Source:
Select what you want to be playing when a Timer turns the power on – any source, any preset FM • AM
station, or Last Stn (the tuner setting when processor was turned off). Be sure that the source and the power
amplifier are turned on or will be on at the Timer turn-on time. If your components have trigger inputs, you
can set a processor trigger to turn them on (see section 3.11).
On-Volume:
Sets the volume that will play when a Timer turns the power on. The volume increases slowly when a Timer
turns the power on.