Anthem Audio D2 - Manual (Page 84)

76
5. REMOTE CONTROL CUSTOMIZATION
continued …
5.3 COPYING COMMANDS
The command from one key can be copied to another key (not applicable to Power, Record, and Learn keys).
To copy a command to another key in the same control mode:
1. Press the control mode key.
2. Press and hold LEARN until the LED flashes twice.
3. Press 9, 9, 4.
4. Press the key to be copied.
5. Press the new key that will have the command. The LED flashes twice.
To copy a command into a different control mode:
1. Press and hold LEARN until the LED flashes twice.
2. Press 9, 9, 4.
3. Press the control mode key of the key to be copied then the key to be copied.
4. Press the new control mode key then the new key that will have the command. The LED flashes twice.
To set the original functions:
1. Press the control mode key.
2. Press and hold LEARN until the LED flashes twice.
3. Press 9, 9, 4.
4. Press the control mode key twice.
5.4 VOLUME LOCK
With Volume Lock engaged, the volume and mute keys control the processor regardless of control mode,
making operation more convenient.
To engage Volume Lock for MAIN:
1. Press and hold LEARN until the LED flashes twice.
2. Press 9, 9, 3.
3. Press MAIN.
To dis-engage Volume Lock for ZONE2 (or ZONE3), and re-engage the ZONE2 (or ZONE3) volume control:
1. Press ZONE2 (or ZONE3).
2. Press and hold LEARN until the LED flashes twice.
3. Press 9, 9, 3.
4. Press VOL .
The volume and mute keys now control MAIN for every control mode selection except ZONE2. You may
continue to disengage other control modes one at a time. To disengage all, press VOL+ in step 4.