Anthem Audio D2 - Manual (Page 57)

49
3. SETUP
continued …
Updating ARC:
Check www.anthemAV.com periodically for ARC software updates. The download contains revision history,
which may also indicate that the processor requires an update for the ARC version to work correctly.
If a newer version is posted and you would like to use it, check your current version:
• Run Anthem Room Correction in Advanced mode.
• Click on Help then click on About. The version number will be displayed.
Proceed only if your version is not the latest:
• Download the latest software from our web site to Desktop.
• When download is complete, right-click on the downloaded .zip file and extract it to Desktop.
• Open the extracted folder and double click on setup. Software installation instructions will appear
on your screen. If you are installing ARC on the computer for the first time, copy your two
serialized files from your software CD to the extracted folder on Desktop before double-clicking
on setup. This way they will be added to Program Files automatically.
• When installation is complete, you can delete the downloaded file and the extracted folder.
IMPORTANT:
With ARC v1.2 the Program Files folder is
My Computer, Local Disk C:\Program Files\Anthem\AnthemRoomCorrection
instead of this one which was used with previous versions:
My Computer, Local Disk C:\Program Files\Anthem\AnthemStatement\AnthemRoomCorrection
If you installed a prior version and do not have the CD at hand, be sure to either:
• copy your serialized files into the extracted folder before double clicking on setup, or...
• if the update has been installed and ARC says that microphone files cannot be found, move your
serialized files from the old AnthemRoomCorrection folder to the new one.
If you are updating from v1.2 to a later version, it is not necessary to relocate serialized files.