Alpine INA-W910 - Manual (Page 117)

117
-EN
SiriusXM Advisory Messages
The following messages may be displayed while operating the unit
in SiriusXM mode.
• The SiriusXM Tuner is disconnected or the unit is having trouble
communicating with the Tuner.
- Connect the Tuner or check the Tuner connection to the back
of the unit.
• The SiriusXM Satellite Radio antenna or cable is either damaged
or not connected correctly to the SiriusXM Tuner.
- Check that the SiriusXM antenna cable is connected to the
SiriusXM Tuner and check that the antenna cable is not kinked
or otherwise damaged. Replace the antenna if necessary.
• The SiriusXM satellite signal is too weak at the current location.
- Move the vehicle to a location with a clear view of the southern
sky.
- Make sure the Satellite Radio antenna is properly mounted and
not obstructed by metal objects.
• The active channel has become unsubscribed or the requested
channel is not available in your subscription package.
NOTE
• The unit will revert to the previous selected channel or to
channel 1 automatically.
- Visit www.siriusxm.com for information on subscribing to this
channel.
• The active channel is no longer in the SiriusXM channel lineup
or the user has entered an invalid channel number.
NOTE
• The unit will revert to the previous channel or to channel 1
automatically.
- Visit www.siriusxm.com for information on the current
channel lineup.
• Your subscription has been updated.
- Press any button to clear this message.
• A locked channel is selected.
- Input the passcode on the number keypad screen, refer to
“Parental Lock Function” on page 96. If wrong passcode is
input, “Incorrect Lock Code” will be displayed and the unit
will revert to the previous channel.
• Buffer for Replay will be full within 11 seconds.
• The Replay buffer is full.
- Memory for storing Alert items is full. Delete some items
before you add more items.
Indication for iPod/iPhone Mode
• Abnormal current is run to the USB connector device.
- Attempt to connect another iPod/iPhone.
• An iPod/iPhone that is not supported by the unit is connected.
- Connect an iPod/iPhone that is supported by the unit.
- Reset the iPod.
• An iPod/iPhone is not connected.
- Make sure the iPod/iPhone is correctly connected and the cable
is not excessively bent.
• There are no songs in the iPod/iPhone.
- Download songs to the iPod/iPhone and connect to the
INA-W910.
• Database error or decoder error.
- You can solve the problem by reconnecting the iPod/iPhone.
• Communication error or boot error, etc.
- You can solve the problem by reconnecting the iPod/iPhone or
changing source.