Alpine INA-W910 - Manual (Page 83)

83
-EN
• BT Audio source is not available with this unit.
Setup Before Using
BLUETOOTH is a wireless technology allowing communication
between a mobile device or personal computer over short distances.
This enables a hands-free call or data transmission between
BLUETOOTH compatible devices. BLUETOOTH transmission is
available in the unlicensed 2.4 GHz spectrum if the distance between
devices is within 10 meters. For details, refer to the BLUETOOTH
Home page (http://www.bluetooth.com).
• Depending on the BLUETOOTH version, a BLUETOOTH
compatible device may not be able to communicate with this unit.
• Proper function of this unit with all BLUETOOTH compatible
devices is not guaranteed. For handling of the BT compatible device,
consult your ALPINE dealer or ALPINE website.
• Depending on the surroundings, BLUETOOTH wireless connection
may be unstable.
• When you place a call, or perform setup operations, be sure to stop
your car in a safe place.
• Depending on the connected BLUETOOTH compatible device(s), the
function may differ. Also refer to the Owner’s Manual of the
connected device(s).
Before using a hands-free phone function, the following setting need to
be made.
Set “BLUETOOTH IN” to ON (page 67).
• Before using a hands-free phone, it must be paired with this unit.
Refer to “BLUETOOTH Setup” (pages 83-85).
For details on the control from a BLUETOOTH compatible device,
refer to the Owner’s Manual of the BLUETOOTH compatible device.
1
Set a BLUETOOTH connection from a BLUETOOTH
compatible device.
2
The PIN code (“0000”) is displayed on the unit.
3
Input the PIN code (“0000”) in a BLUETOOTH
compatible device.
4
If this unit is successfully connected to a
BLUETOOTH compatible device, “Connected/
(Device name)” is displayed, and then the unit
returns to normal mode.
• Set “Setting the Search Mode” (page 84) to Visible Mode ON to
enable this unit to recognize a mobile phone. For mobile phone
passkey (passcode) input operation, refer to the mobile’s Owner’s
Manual. Additionally, the mobile phone can be searched directly
from this unit. Refer to “Registering the BLUETOOTH Device”
(page 84).
• If a BLUETOOTH compatible device is successfully connected, the
next time when the ignition key of the car is turned to on, the unit will
automatically connect to the previously connected device. However,
the connection may fail. If the auto connection fails, try the
connection manually.
BLUETOOTH Setup
The following steps 1 to 6 are common to the various BLUETOOTH
functions. For details, refer to each individual function.
• While calling, BLUETOOTH Setup operation cannot be performed.
• Set “BLUETOOTH IN” to ON (page 67), and then perform
BLUETOOTH Setup operation.
1
Press SOURCE/ on the unit.
The SOURCE selection screen is displayed.
2
Touch [ ] on the main source screen.
The Setup Select screen is displayed.
3
Touch [ ] of Source Setup.
The Source Setup screen appears.
4
Touch [ ] of BLUETOOTH Setup.
The BLUETOOTH Setup screen appears.
5
Touch [ ], [ ] or [ ] of the desired item to
change its setting.
Setting items:
Paired Devices / Device Search / Clear Device /
Service Provider / Visible Mode / Auto Answer / Speaker Select /
MIC Input / Firmware Version / Firmware Update / Echo Cancel /
Navi Voice IN Call / Shortcut Memory
6
Touch [ ] on the left side of screen to return to the
previous screen.
Touch [Exit] to return to the main source screen that was
displayed before the setup operation was started.
BLUETOOTH
Operation
About BLUETOOTH
Before Using Hands-Free Function
How to connect to a BLUETOOTH
compatible device (Pairing)
BLUETOOTH Setup Operation