Setting the digital output, Setting the rear entertainment system, Siriusxm setup – Alpine INA-W910 User Manual

Page 68: Siriusxm setup operation

Advertising
background image

68

-EN

To connect an audio processor using the optical digital output, set to
“ON” by the following procedure.

Setting item: Optical Out

Setting contents: OFF / ON

Afterwards, set ACC to OFF once, then turn it ON again. The setting

of Digital Output is decided.

The rear entertainment function independently routes different sources
to the front and the rear inside a car. For example, while listening to the
radio or other audio source in the front, DVD can be enjoyed in the rear
with the optional rear monitor and headphones.

Setting item: Rear Source
Setting contents: OFF / Disc / iPod / AUX / Game / DVD / DTV /

EXT.DVD / DVD CHG. / USB Video / AUX2

Select OFF to cancel the rear entertainment mode.
The display of setting contents may vary depending on the setting

and connected device.

SiriusXM Setup Operation

The operation can be performed when the optional SiriusXM Tuner is
connected.

1

Press SOURCE/

on the unit.

The SOURCE selection screen is displayed.

2

Touch [

] on the main source screen.

The Setup Select screen is displayed.

3

Touch [

] of Source Setup.

The Source Setup screen appears.

4

Touch [

] of SiriusXM Setup.

The SiriusXM setting Setup menu appears.

5

Touch [

] of the desired item to change its setting.

Setting items:

Alert Setup / Game Alert Setup / Parental Lock / Signal
Indicator

6

Touch [

] to return to the previous screen.

Touch [Exit] to return to the main source screen that was
displayed before the setup operation was started.

Setting the Digital Output

Setting the Rear Entertainment System

SiriusXM Setup

To display the SiriusXM Setup Menu screen:
Your vehicle must be parked with the ignition key in the ACC or
ON position. To do this, follow the procedures below.

1 Bring your vehicle to a complete stop at a safe

location. Engage the parking brake.

2 Keep pushing the foot brake and release the parking

brake once then engage it again.

3 When the parking brake is engaged for the second

time, release the foot brake.

For automatic transmission vehicles, place the transmission lever

in the Park position.

Now, the locking system for the Sirius mode operation has been
released. Engaging the parking brake can reactivate the SiriusXM
Setup Menu, as long as the car’s ignition has not been turned off.
It is not necessary to repeat the above procedure (1 through 3) of
“To display the SiriusXM mode screen.”
Each time the ignition is turned OFF, perform the procedure of “To
display the SiriusXM mode screen.”

The following steps 1 to 6 are common operations to each
“Setting item” of SiriusXM Setup. Refer to each section for
details.

Advertising