Alpine INA-W910 - Manual (Page 85)

85
-EN
Adjusting the volume for the microphone input
You can emphasize or weaken the microphone input volume level.
Setting item: MIC Input
Touch [ ] or [ ] to select the desired volume level (0 ~ 7).
• The setting cannot be adjusted during a phone call. Adjust the setting
before placing a call.
• The setting can be adjusted only when the BLUETOOTH compatible
device is connected.
Displaying the firmware version
Setting item: Firmware Version
The current firmware version of this unit will be displayed.
Updating the firmware
Setting item: Firmware Update
Future BLUETOOTH firmware update of this unit (for phone
compatibility) at customer end will be available for this unit.
For information to update your BLUETOOTH firmware, please visit
Alpine America home page (http://www.alpine-usa.com).
Turning the Echo Cancel ON or OFF
Setting item: Echo Cancel
The echo of hands-free phone will be avoided correspondingly by
setting the Echo Cancel to ON.
Receving Navigation Voice while calling
Setting item: Navi Voice IN Call
The voice guidance of the navigation system will be mixed with the call
by setting the Navi Voice IN Call to ON.
Deleting the stored shortcut memory
You can delete the stored shortcut memory telephone number by using
here.
Setting item: Shortcut Memory
Touch [Delete] of preset 1 ~ 5 to delete the shortcut memory.
• About how to store the telephone number as a shortcut dial, refer to
page 89.
Hands-Free Phone Control
Hands-free calls are possible when using a HSP (Head Set Profile) and
HFP (Hands-Free Profile) compatible mobile phone with this unit.
• Avoid performing a hands-free call in heavy traffic or on narrow or
winding streets.
• Close the windows while calling to reduce background noise.
• If both calling parties are using hands-free devices, or the call is
made in a noisy location, difficulty hearing the other person’s voice
is normal.
• Depending on telephone line conditions or certain mobile devices
used, voices may sound unnatural.
• When using a microphone, speak as directly as you can into the
microphone to pick up the best sound quality.
• Certain mobile phone features are dependent on the capabilities and
settings of your service provider’s network. Additionally, certain
features may not be activated by your service provider, and/or the
provider’s network settings may limit the feature’s functionality.
Always contact your service provider about feature availability and
functionality.
All features, functionality, and other product specifications, as well
as the information contained in the Owner’s Manual are based upon
the latest available information and are believed to be accurate at
the time of printing.
Alpine reserves the right to change or modify any information or
specifications without notice or obligation.
Answering a Call
Incoming calls are announced by the received call ring tone and a
displayed message (Caller name/PHONE No.).
Touch [ ].
The call starts.
• Indicator (Signal Strength):
While calling, the indicator will display the current signal strength of
mobile phone. While in the mode other than Calling, the unit cannot
read the signal strength of the mobile phone exactly. In this case, the
indicator displays the signal strength of last call.
• When “Setting the Received Calls automatically (Auto Answer)”
(page 84) is set to ON, you can receive a call automatically.
• While calling, the source sound on the unit is muted.
After calling, playback will resume.
About the Hands-Free Phone