Alpine INA-W910 - Manual (Page 33)

33
-EN
GUIDEVIEW WINDOW™ Function
This function allows you to get the navigation information from the
normal screen of Audio Source promptly.
Go to any audio source screen, press AUDIO
hardkey to turn on GUIDEVIEW WINDOW™. Press again
to turn it off.
Start-Up
Non Guidance
When touching the GUIDEVIEW WINDOW, the window
will toggle between displaying heading orientation and
the speed limit of the current street.
The Current street name that the vehicle is matched on
to is displayed.
If no GPS signal, the text “Locating GPS Satellites” will
be displayed.
If your vehicle is off segment, nothing is displayed in the
current street name location.
Route Guidance
The street name of the next maneuver is displayed in the
top portion of the screen.
Second immediate maneuver arrow is displayed only for
double maneuvers along the route.
The maneuver arrow is displayed for the upcoming
guidance.
A countdown bar is displayed when approaching the
maneuver.
The distance to the maneuver is displayed at the bottom
of the arrow.
Touching the GUIDEVIEW WINDOW will prompt the
system to announce the next maneuver.
Rerouting
It will be displayed when the rerouting is calculated.
Settings
The lockout function applies to Setup Menu and Edit Address Book. To
enable setup menu, your vehicle must be parked with the ignition key in
the ACC or ON position. To do this, follow the procedures below.
1 Bring your vehicle to a complete stop at a safe location.
Engage the parking brake.
2 Keep pushing the foot brake and release the parking
brake once then engage it again.
3 When the parking brake is engaged for the second time,
release the foot brake.
• For automatic transmission vehicles, place the transmission lever in
the Park position.
Turn on the GUIDEVIEW WINDOW™ Mode
GUIDEVIEW WINDOW™ Display
Settings Menu