Alpine INA-W910 - Manual (Page 49)

49
-EN
DVD Audio
Touch [ ].
The repeat mode switches every time the button is touched.
VCAP mode*:
VOFF mode*:
* When “VCAP” or “VOFF” is set in “Setting the DVD-Audio
Playback Mode” (page 59).
Searching by Title/Group
Use this function to easily find positions on the DVD using the DVD’s
titles or groups.
1
Touch [P1/2]* while playback is stopped.
The function guide appears.
* The display differs, depending on the disc (mode).
2
Touch [10KEY].
The numeric keypad input mode screen appears.
3
Enter a desired title or group by touching its title or
group number.
See page 46 for operation of the numeric keypad.
4
Confirm your selection by touching [Enter].
Playback will start from the title number selected.
• This function cannot be used on discs on which no title numbers are
recorded.
• Playback starts from the beginning of the chapter/track number in the
state of Pre Stop.
• Some disc may not accept any operation.
Searching Directly by Chapter or Track
Number
Use this function to easily move to the beginnings of the chapters or
tracks on the disc.
1
Touch [P1/2]* in any mode other than stop mode.
The function guide will appear.
* The display differs, depending on the disc (mode).
2
Touch [10KEY].
The numeric keypad input mode screen will appear.
3
Touch and enter the chapter number you want to
play.
See page 46 for operation of the numeric keypad.
4
Touch [Enter] to confirm your selection.
Playback will start from the selected chapter or track.
• This function is not available for a disc on which chapters or tracks
are not stored.
Switching the Angle
On DVDs in which scenes have been filmed from multiple angles, the
angle can be switched during playback.
1
During playback, touch [P1/2]*.
The function guide changes.
* The display differs, depending on the disc (mode).
2
Touch [ANGLE].
The angle switches between the angles recorded on the
disc every time the button is touched.
• Some time may be required for the angle to change.
• Depending on the disc, the angle may switch in one of two ways.
- Seamless: The angle switches smoothly.
- Non-seamless: When the angle is switched, a still picture is
displayed first, after which the angle switches.
• To play back a DVD-Audio disc, set “VCAP” in “Setting the DVD-
Audio Playback Mode” (page 59).
Scroll to Move the Page Forward or
Backward
“Page” is a still image stored on a DVD-Audio disc.
1
Touch [P1/3] twice while playing a DVD-Audio disc
in VCAP mode*.
* Playing back a DVD-Audio disc when “VCAP” is set in “Setting the
DVD-Audio Playback Mode” (page 59).
2
Touch PAGE [ ] or [ ].
The display switches.
Touch and hold to display the home page.
• For DVD-Audio discs without Pages, depending on the DVD-Audio
disc, the “Page” function may not be operable if images are in slide
show form.
Switching the Audio Tracks
DVDs with multiplex audio or audio languages allow switching the
sound during playback.
1
During playback, touch [P1/2]*.
* The display differs, depending on the disc (mode).
2
Touch [AUDIO].
The sound switches between the alternate audio tracks
recorded on the disc every time the button is touched.
The track is played repeatedly.
The group is played repeatedly.
The playback returns to normal mode.
The track is played repeatedly.
The group is played repeatedly.
The disc is played repeatedly.