Alpine INA-W910 - Manual (Page 125)

125
-EN
Connections
• Set the system switch to “NORM” when only a changer is connected (when the Ai-NET compatible equalizer is not used). When the IMPRINT
audio processor is connected, set to EQ/DIV position.
* The system switch is located on the bottom of the unit.
CD Changer
(sold separately)
To remote output lead
To plus side of the back
lamp signal lead of the car
(White/Brown)
(Orange/White)
(Black)
(Blue/White)
(Blue)
(Pink/Black)
(Yellow/Blue)
(Yellow)
(Black)
SPEAKER
LEFT
FRONT
(White/
Black)
SPEAKER
LEFT
REAR
(Green)
SPEAKER
RIGHT
REAR
(Violet/
Black)
SPEAKER
RIGHT
FRONT
(Gray)
To amplifier or equalizer
Front left Rear left Rear right Front right
REMOTE IN
REVERSE
CAMERA SW
REMOTE TURN-ON
POWER ANT
AUDIO INTERRUPT IN
PARKING BRAKE
BATTERY
GND
Antenna
(White)
(Green/
Black) (Violet) (Gray/
Black)
FOOT BRAKE
(Yellow/Black)
IGNITION
(Red)
To remote input lead
To power antenna
Not used
To the parking brake
signal lead
To the foot brake cord
or brake lamp cord
Battery
Speakers
Ignition key
(Yellow)
(Red)
(White)
(Yellow)
(Red)
(White)
Amplifier
Amplifier
Amplifier
Rear Left
Rear Right
Front Left
Front Right
Subwoofers
Not used
To Audio Input terminals
(R, L)
To Audio Output terminals
(R, L)
To Video Input terminal
To Video Output terminal
To iPod/iPhone To Flash memory/
Portable audio player
To guide control input terminal
(White/Brown)
REMOTE OUT
or
CAMERA IN
(Yellow)
To steering remote control
interface box
To Guide Input terminal
(White/Green)
GUIDE CONT
GUIDE
(Black)
GPS Antenna
Microphone
To Camera with RCA Output
terminal
To SiriusXM Tuner
(Black)