Alpine INA-W910 - Manual (Page 41)

41
-EN
PTY (Program Type) Tuning
FM Radio mode
1
Touch [DX SEEK]* to choose the PTY tuning mode.
The PTY mode is activated.
The Program Type of the station being currently received
will be displayed.
2
Touch [ ] or [ ] after activating the PTY mode to
choose the desired program type while “PTY”
(program type) is displayed.
Each press scrolls the program type by one.
3
Touch [PTY SEARCH] after selecting the program
type to start searching for a station of the selected
program type.
If no station is found, “NO PTY” will be displayed.
* The button displays the current tuning mode.
Storing the tag information of RBDS
stations
iTunes Tagging lets you tag songs heard on RBDS stations. You can
preview, buy and download later, songs from your iTunes tagged
playlist the next time you sync your iPod/iPhone. If the unit is
connected to a Tagging compatible iPod/iPhone, you can use the iTunes
Tagging function. For details, refer to the Owner’s Manual of the
Tagging compatible iPod/iPhone.
When a desired song is heard on an RBDS station, if there is tag
information of the song, the [Tag] button will light.
Touch [Tag] to save its tag information.
If no iPod/iPhone is connected, “Tag Count X” is displayed (X is
the total amount of the tag information stored in this unit).
• During tagging, the iPod/iPhone takes priority to save the tag
information. If no iPod/iPhone is connected, the tag information is
saved to this unit.
• When the memory of iPod/iPhone is full, “iPod Memory Full, Tag
Count X” is displayed. The tag information will be stored to the unit.
• If the tagging operation is interrupted by a hands-free phone call, the
tagging operation will be canceled and the unit will display
“Cannot Tag”.
• This unit can store up to 50 pieces of tag information. When the
memory of the unit is full, “Tuner Memory Full. Connect iPod” may
be displayed.
• When an iPod that doesn’t support the tagging function is connected,
“Non-Tagging iPod” may be displayed.
• When the iPod/iPhone is disconnected from the unit during tagging,
its tag information will be stored in the unit.
• If there is stored tag information on the unit, when an iPod/iPhone
supporting the tag function is connected, the stored tag information
will be transferred to the iPod/iPhone automatically. When the iPod/
iPhone memory becomes full, “iPod Memory Full” will be displayed,
and any remaining tag information on the unit will not be transferred
to the iPod/iPhone.
• If tag information already exists, “Already Tagged” will be displayed
when you try to tag information again.
Changing the Display
(Compulsory Analog Radio mode only)
Text information, such as PS (Program Service name), Song title, Artist,
etc. is displayed while receiving an FM radio station of RBDS Tuner.
Touch [INFO.] on RBDS Tuner mode screen.
Each time you touch this button, the display changes as shown
below.
*
1
If there is no receivable text message or the unit cannot receive a text
message properly, the display shows blank.
*
2
Displays Song title / Artist / Album in the main program Service
Data.
• If an RBDS radio station is received due to no HD Radio signal, the
PS, Song title, Artist name and Album name information of RBDS
radio station is displayed and cannot be changed by touching
[INFO.].
PS
PTY
PS
PTY
Radio Text *
1
Song title * 2
Artist name *
2
Album name *
2