Alpine INA-W910 - Manual (Page 37)

37
-EN
Information
Go to Main Menu Info
Dashboard Button
For viewing dashboard, see page 37.
GPS Button
For viewing GPS, see page 37.
Route Button
For changing the route, see page 31.
System Button
For viewing system information, see page 38.
Go to Main Menu Info Dashboard
The odometer displays the speed and time traveled.
This feature allows you to view GPS satellite signal information. You
can view the dynamic location information received from satellite, such
as, signal strength, compass (direction information), latitude/longitude,
approximate altitude.
An explanation of the messages is shown below.
Go to Main Menu Info GPS
The following messages are displayed while the GPS receiver is
tracking satellites:
Locating GPS Satellites
The INA-W910 searches the sky looking for GPS satellites.
Acquiring GPS Signal
The INA-W910 acquires positioning information transmitted from
1 to 3 tracked satellites while searching for more satellites
(minimum 4 of needed).
Fixing GPS Position
The INA-W910 requires continuous signals from 4 or more
tracked satellites (for 30 seconds) in order to accurately fix your
position.
Information Menu
Viewing Dashboard
Driving Average Average speed.
Overall Average Average speed (includes idle time).
Maximum Speed Maximum speed reached.
Driving Time Time vehicle has been moving.
Idle Time Time vehicle has been stopped (not moving).
Total Time
Total elapsed time (driving time plus idle
time).
Viewing GPS Status