HID FARGO HDP5000 User Guide - Manual (Page 12)

HDP5000 & HDPii Plus Card Printer Encoder User Guide_L000950, 3.0
Page 12 of 100 July 2013
© 2012, 2013 HID Global Corporation. All rights reserved
Term Description
Software Drivers
32 bit support for:
• Windows XP
• Server 2003
32 and 64 bit support for:
• Vista
• Server 2008
• Windows 7
• Windows 8
64 bit support for:
• Server 2008 R2
• Server 2012
Supply Frequency
50 Hz / 60 Hz
Supply Voltage
120-240 VAC
Supported
Printers/Models
Ethernet
USB ( 2.0)
System Requirements
x86 based PC or compatible,
• 500MHz computer with 256MB of RAM or higher
• 500MB free hard disk space or higher
Warranty Printer: Two year (One year On-Call Express, U.S. only); optional
Extended Warranty Program (U.S. only); see below for more detail.
• Two (2) Year Factory Warranty
• Covers parts and depot repair
• First year On-Call-Express (loaner printer U.S. only )
• 2
nd year On-Call-Express available for a fee. This must be
purchased before the first year On-Call-Express expires.
• Extended Warranties available
Printhead: Lifetime; unlimited pass with Fargo-certified Cards
3 Setup and Installation Procedures
3.1 Inspection – Card Printer
• While unpacking your Printer, inspect the carton to ensure that no damage has occurred
during shipping. Make sure that all supplied accessories are included with your unit.
• Reference the Card Printer Quick Start Guide for information on how to load the Print
Ribbon, Transfer InTM Film, Overlaminates and Card stock.
• See the Quick Start Guide for connecting the Power to the Printer and Lamination
Module.
IMPORTANT: Do not plug in the USB cable until prompted to do so during the installation of
the Printer Driver. Follow the prompts to install the driver.