2 print left of form – HID FARGO HDP5000 User Guide User Manual
Page 23
Advertising
July 2013
Page 23 of 100
© 2012, 2013 HID Global Corporation. All rights reserved.
HDP5000 & HDPii Plus Card Printer Encoder User Guide_L000950, 3.0
4.7.2 Print Left of Form
From
Advanced Settings, modify the Print Left of Form Setting.
Figure 3 - Print Left of Form
Step
Procedure
1
Print the Alignment Card Self-test.
2
Adjust the Print LOF up or down until the border of the LOF Zero Line is showing on the edge of the
card as shown.
3
Measure the density square, as shown.
Adjust the image density to 66% ± 1%.
Advertising