HID FARGO HDP5000 User Guide - Manual (Page 63)

July 2013 Page 63 of 100
© 2012, 2013 HID Global Corporation. All rights reserved.
HDP5000 & HDPii Plus Card Printer Encoder User Guide_L000950, 3.0
4.15.2 Combining Inhibit Panel Definitions
Inhibit Panels defined using the Printer Driver Interface are additive to panels defined using
Workbench and text-based definitions or both (such as “~i” commands). The Inhibit Panels
defined using the Printer Driver Interface apply to a printed card in addition to other defined
inhibit areas and do not override or eliminate prior definitions.
Inhibit Panels defined using the Printer Driver Interface are applied to card layouts as long as
the Inhibit Panel is defined from the Inhibit Panel tab. To remove the Inhibit Panel from the
card layout, remove the definition from the tab.
4.16 Using the Printer Supplies tab
Use the options on this tab to view information (Type, Reorder Number) about the Ribbon,
InTM Film, Laminate (Cartridge 1) and Laminate (Cartridge 2) installed in the Printer. (
Note:
The gauges are horizontal.)
Figure 23 - Printer Supplies