HID FARGO HDP5000 User Guide - Manual (Page 60)

HDP5000 & HDPii Plus Card Printer Encoder User Guide_L000950, 3.0
Page 60 of 100 July 2013
© 2012, 2013 HID Global Corporation. All rights reserved
4.14.7 Defining the Area to activate the Card Grid
Step Procedure
1 Select on the appropriate
Defined Area (see below) to activate the card grid in the upper half of the
window.
• It is through this card grid that up to five areas can be defined, as shown below.
• When the card grid is first activated, then a small black square will appear at its default size of .2 x
.2 (5mm x 5mm) and at its default location in the lower left-hand corner (0,0). (
Note: This square
represents the first defined area.)
4.14.8 Selecting the Print YMC under the K and Print K Only options
Step Procedure
1 Use the
Defined Area function.
a. Define another area by clicking on the
Defined Area. (Note: Another .2 x .2 (5mm x 5mm) area
will appear in the lower left-hand corner. This is the location in which all newly defined areas will
first appear. Up to 5 areas can be defined.)
b. Delete an area by selecting the area and clicking on the
Delete button. (Note: If all areas are
deleted, the K Panel Resin options will automatically be deselected.)
2 Select the
Print YMC Under K option to print all black in the designated Defined/Undefined areas with
the Yellow (Y), Magenta (M) and Cyan (C) Ribbon Panels directly beneath the resin black (K) Panel.
(
Note: Select this option if printing resin black text or barcodes onto a colored background to provide a
more gradual transition between the two.)
OR
Select the
Print K Only option to print all black in the designated Defined/Undefined areas only with
the resin black (K) Panel or to print resin black onto a white background to maximize the sharpness of
printed text and barcodes.