HID FARGO HDP5000 User Guide - Manual (Page 88)

HDP5000 & HDPii Plus Card Printer Encoder User Guide_L000950, 3.0
Page 88 of 100 July 2013
© 2012, 2013 HID Global Corporation. All rights reserved
9.2 Configuring Fluorescent Data (F-Panel for YMCFK Ribbon)
This process creates a fluorescent image on your card using a simple text string command in
your badge application.
Step Procedure
1
Creating Fluorescent Text. Create a new text box in your
badge application.
2 Type the
TEXT that you want to appear as fluorescent and put
a
~T before the start of the text with no space after the ~T. The
text will start on the card where the
~T begins.
Card - Badge Application
3
Creating a Fluorescent Image. In a separate drawing
program, create the image you wish to fluoresce. BMP Image located at
c:\globe.bmp
4 Create the IMAGE in the actual size that you want it to appear
on the card, and save it as a Grayscale or 1 - bit bmp file on
the root c:\ directory. Do not put spaces in the file name.
5 Create a new text box in your badge application, and type ~I
followed by the address of your image (see Step 2).
The top left of your image will start at the top left of your text
box.
6 Set up the printer driver preferences. Refer Steps 8-10.