HID FARGO HDP5000 User Guide - Manual (Page 20)

HDP5000 & HDPii Plus Card Printer Encoder User Guide_L000950, 3.0
Page 20 of 100 July 2013
© 2012, 2013 HID Global Corporation. All rights reserved
4.6 Selecting the Clean Printer tab
To clean the printer, follow the instructions outlined on the
Clean Printer tab.
Figure 1 - Clean Printer
• Clean button: Launches cleaning routine. Follow the instructions to set up the Printer.
• Help button: Launches help specific to the Clean Printer tab.
Step Procedure
1 Click the
Clean Printer tab.
a. Remove the Card, InTM Film and Laminate Cartridges and close the covers.
b. Remove the paper back from both sides of the Cleaning Card.
Note: DO NOT remove the left liner if a Magnetic Encoding Module is installed in your printer.
c. Insert the Cleaning Card into the Card Hopper’s infeed rollers.
d. Click
Clean button.
e. Guide the Cleaning Card into the Printer as needed.
f. When the Cleaning routine is complete, the Cleaning Card exits the Printer.
g. Reinstall the Card, InTM Film and Laminate Cartridges.
The Cleaning routine begins after completing all current print jobs. Use a standard CR80 sized
cleaning card.
4.6.1 Using Clean Printer Group