HID FARGO HDP5000 User Guide - Manual (Page 37)

July 2013 Page 37 of 100
© 2012, 2013 HID Global Corporation. All rights reserved.
HDP5000 & HDPii Plus Card Printer Encoder User Guide_L000950, 3.0
4.9 Using the Dual Sided Group Functions
The Dual Sided group checkboxes are disabled if no Flipper is automatically found or if Dual
Sided is manually turned off.
4.9.1 Using the Dual Sided - Print Both Sides option
Use Dual Sided to print automatically onto both card sides.
Step Procedure
1 Select
Print Both Sides radio button in addition to any program
supporting duplex printing.
Note: The program must send down two or more separate
pages for printing within the same document.
2
Page 1 is transferred to the front side of the card.
Page 2 is transferred to the backside of the card.
With this option selected, the
Printer Driver places all odd numbered pages on the front side of the
card and all even numbered pages on the backside.
4.9.2 Using the Print Both Sides - Split 1 Set of Ribbon Panels option
Use this option to provide the most economical means of printing a dual-sided card since a
single set of Ribbon Panels will split to print both the front and backside of a card.
• This option is active when Print Both Sides is checked.
• The Default is active and unchecked except for YMCKK and YMCKIKI, which are
checked.
Step Procedure
1 Select this option to automatically print full-color on the front of a
card and resin black on the back of a card (using YMCKK Print
Ribbons).
If using an YMCKK Ribbon, the front of the card is printed with the
YMCK Panels and the back is printed with the second K Panel.
Notes:
This is enabled automatically when selecting the YMCKK Ribbon.
This option is not available if using the YMCKH Ribbon.