HID FARGO HDP5000 User Guide - Manual (Page 17)

July 2013 Page 17 of 100
© 2012, 2013 HID Global Corporation. All rights reserved.
HDP5000 & HDPii Plus Card Printer Encoder User Guide_L000950, 3.0
4.2.2 Reviewing the Ribbon Low message
4.2.3 Reviewing the Laminate Low Message
The default setting is checked.
• If checked, Lamination Low message box is displayed with every print job when the
Printer reports low Lamination to the Driver.
• Do not show this message again. This check box allows the user to suppress a
message per Driver instance. Default = unchecked.
4.2.4 Using the InTM Film Low message
The default setting is checked.
• If checked, InTM Film Low message box is displayed with every print job when Printer
reports low InTM film to the Driver.