Important notice – Sony KE-42MR1 User Manual

Page 13

Advertising
background image

13

Safety Information

GB

On the PDP (Plasma Display Panel)

Please note that the PDP screen is made with high-precision technology. However, black points or
bright points of light (red, blue, or green) may appear constantly on the PDP screen, and irregular
coloured stripes or brightness may appear on the PDP screen. This is not a malfunction.

On handling the remote control

• Handle the remote control with care. Do not drop or step on it, or spill liquid of any kind onto it.
• Do not place the remote control in a location near a heat source, or in a place subject to direct

sunlight, or in a damp room.

On handling and cleaning the screen surface of the display unit

The screen of this display unit has an anti-reflection screen coating. To avoid screen degradation,
follow the points mentioned below. Do not push on or scratch with hard objects, or throw anything at
the screen. The screen may be damaged.
• Be sure to unplug the mains lead connected to the media receiver unit from the mains before

cleaning.

• Do not touch the display panel after operating continuously for along period as the display panel

becomes hot.

• The screen of this display unit has an anti-reflection screen coating. We recommend that the screen

surface is touched as little as possible.

• Clean the screen with the supplied cleaning cloth or a soft cloth lightly moistened with a mild

detergent solution.

• Never use any type of abrasive pad, scouring powder, or solvent, such as alcohol or benzine. This

type of contact may result in damage to the screen surface.

On cleaning the cabinet

• Be sure to unplug the mains lead connected to the media receiver unit from the mains before

cleaning.

• Clean the cabinet with the supplied cleaning cloth or a soft cloth lightly moistened with a mild

detergent solution.

• Note that material deterioration or screen coating degradation may occur if the display unit is

exposed to a volatile solvent, such as alcohol, thinner, benzine or insecticide, or if prolonged contact
is maintained with rubber or vinyl materials.

• The ventilation holes can accumulate dust over a period of time and the accumulated dust may

make the cooling function of the built-in fan less effective. To prevent this, we recommend
removing the dust periodically (once a month) using a vacuum cleaner.

Important Notice

When used at an altitude of greater than 2400m or 7891 feet (air pressure less than 750hPa), this
Plasma Display Panel may generate a low buzzing sound as a result of the difference between
the interior and exterior air pressure of the panels. This is not considered a defect and is not
covered under by the Sony Warranty. This buzzing sound is an inherent characteristic of any
Plasma Display Panel.

01GBKE42MR1.fm Page 13 Saturday, October 19, 2002 10:21 AM

Advertising