Sony KE-42MR1 - Manual (Page 35)

35
Menu System
GB
Screen Saver The “Screen Saver” option allows you to reduce image retention.
If the following images are displayed for an extended period
time, image retention (afterimage) in areas of the screen may
result due to the characteristics of the Plasma Display Panel.
• Black bars at the top and bottom that appear with a wide
video source (Letterbox picture).
• Black bars to the left and right that appear with a 4:3 video
source (conventional TV broadcasts).
• Video game sources
• PC images
• DVD on-screen menu displays
• On-screen menus, channel numbers, etc., of connected
equipment such as Set top box, Cable modem, VCR, etc.
To do this:
1
After selecting the option, press .
2 Press or to select the following option and press .
Then press or to move the picture position (Orbit), or
turn the screen to white (All White) to reduce image retention.
Orbit: Select On to move the position.
All White: Select On to turn the screen to white.
• All White function finishes automatically after 30 minutes.
If image retention is still present, repeat the above.
• To cancel halfway, press any buttons (except the sound-
related buttons) on the remote.
AV3 Output/
AV4 Output The “AV3 Output” and “AV4 Output” options allow you to select
the source to be output from the Scart connectors
3/ and
4/ . You can record from these Scarts any signal coming
from the TV or from external equipment connected to the other
Scart connectors.
If your VCR supports SmartLink, this procedure is not
necessary.
To do this:
1
After selecting the option, press .
2 Press or to select the desired output signal: Auto, TV,
AV1 , AV2, AV3 (only for AV4 Output), AV4 (only for AV3
Output) or AV6.
• If you select Auto, the output signal will always be the
same one that is displayed on the screen.
• If you have connected a decoder to the Scart connectors
3/ or 4/ , or to a VCR connected to this
Scart, please remember to change back to AV3 Output or
AV4 Output
to Auto for correct unscrambling.
• When AV3 Output or AV4 Output is set to Auto, the
signals input through the AV5 input, PC input and
“Memory Stick” input are not output from Scart
connectors 3/
or 4/ .
S
S
S
(continued)
01GBKE42MR1.fm Page 35 Saturday, October 19, 2002 10:21 AM