Sony KE-42MR1 - Manual (Page 40)

40
Menu System
C) Normally the automatic fine tuning (AFT) will give the best
possible picture, however you can manually fine tune the TV to
obtain a better picture if the picture is distorted.
To do this:
1 Whilst watching the channel (TV Broadcast) you wish to fine-
tune, select the AFT option and press
.
2 Press or to adjust the fine tuning between -15 and +15
and press OK.
3 Highlight he Confirm option and press OK. Then press to
select OK and finally press OK to store.
D) Skip any unwanted programme numbers when they are
selected with the PROG +/-.
To do this:
1 Highligh the Programme option, press PROG +/- to select the
programme number you want to skip.
2 When the programme you want to skip appears on the screen,
select the Skip option and press
.
3 Press or to select Yes and press OK.
4 Highlight the Confirm option and press OK. Then press to
select OK and finally press OK to store.
To cancel this function afterwards, select No instead of Yes in the step
above.
E) View and record scrambled channels when using a decoder
connected to the Scart connectors
3/ or 4/
either directly or via a VCR.
This option is only available depending on the country you
have selected in the “Language/Country” menu.
To do this:
1 After selecting the Decoder option and press .
2 Press or to select On and press OK.
3 Highlight the Confirm option and press OK. Then press to
select OK and finally press OK to store.
To cancel this function afterwards, select Off instead of On in above.
S
01GBKE42MR1.fm Page 40 Saturday, October 19, 2002 10:21 AM