Sony KE-42MR1 - Manual (Page 27)

27
Menu System
GB
• No option can be adjusted when Mode is set to Live.
• Only Contrast can be adjusted when Mode is set to Standard or Movie.
Contrast Press or to reduce picture contrast.
Press or to enhance picture contrast.
Brightness Press or to darken the picture.
Press or to brighten the picture.
Colour Press or to decrease colour intensity.
Press or to increase colour intensity.
Colour cannot be adjusted for an RGB input signal connected to the PC
connector.
Hue Press or to decrease the green tones.
Press or to increase the green tones.
Hue can only be adjusted for NTSC colour signal (e.g. USA video tapes).
Sharpness Press or to soften the picture.
Press or to sharpen the picture.
NR (Noise
Reduction)
Auto/Off/Low/Middle/High
Select to reduce the noise level.
NR (Noise Reduction) cannot be adjusted for an RGB input signal connected to
the PC connector, a DTV* signal connected to the Y, P
B
/C
B
, P
R
/C
R
jacks of
5, and the “Memory Stick” input.
* DTV is the digital broadcast format in the United States (e.g. digital tuner with
RGB signal).
Dynamic Picture On/Off
Select to enhance the picture contrast.
Colour Tone Cool/Normal/Warm
Select to give bright colours a red tint (Setting is variable from
Cool
to Warm).
Colour Correction On/Off
Select to emphasise reds and blues.
Colour Correction cannot be adjusted for an RGB input signal connected to the
PC connector.
Gamma Correction High/Middle/Low
Select to adjust the balance between bright and dark areas of the
picture.
Reset Cancel/OK
Select OK to reset the picture to the factory preset levels.
01GBKE42MR1.fm Page 27 Saturday, October 19, 2002 10:21 AM