Rmc 7152 – Acnodes RMC 7152 User Manual
Page 23
14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at
RMC 7152
14” short depth server
RMC 7152
14” short depth server
23
RMC 7152
14” short depth server
1. After removing the plastic cap, use your thumb and the
index finger to hold the CPU at the north and south
center edges.
2. Align the CPU key (the semi-circle cutout) with the socket
key (the notch below the gold color dot on the side of the
socket).
3. once the CPU and the socket are aligned, carefully lower
the CPU straight down into the socket. Do not rub the CPU
against the surface of the socket or its pins to avoid damaging
the CPU or the socket.
4. With the CPU in the socket, inspect the four corners of the
CPU to make sure that it sits level and is properly installed.
5. Once the CPU is securely seated in the socket, lower the
CPU load plate to the socket.
6. Use your thumb to gently push the socket slip down to
the clip lock.