Pc 5150, Rmc 7152 – Acnodes RMC 7152 User Manual
Page 60
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at
PC 5150
15-inch touch panel PC
60
RMC 7152
14” short depth server
14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
Headless Mode
This feature is used to enable system to function without a keyboard, monitor and/ or mouse attached The options are Enabled
and Disabled.
ACPI Version Features
The options are ACPI v1.0, ACPI v2.0 and ACPI v3.0. Please refer to ACPI's website for further explanati
.
XIPMI Configuration
Intelligent Platform Management Interface (IPMI) is a set of common interfaces that IT administrators can use to monitor
system health and to manage the system as a whole. For more information on the IPMI specifications, please visit Intel's
website
IPMI Firmware Revision
This item displays the current IPMI firmware revision.
Status of BMC
Baseboard Management Controller (BMC) manages the interface between system management software and platform hard-
ware. This is an informational feature which returns the status code of the BMC micro controller.
XView BMC System Event Log
This feature displays the BMC System Event Log (SEL). It shows the total number of entries of BMC System Events. To view
an event, select an Entry Number and pressing <Enter> to display the information as shown in the screen.
o Total Number of Entries
o SEL Entry Number
o SEL Record ID
o SEL Record Type
o Timestamp, Generator ID
o Event Message Format User
o Event Sensor Type
o Event Sensor Number,
o Event Dir Type
o Event Data
Clear BMC System Event Log
Select OK and press the <Enter> key to clear the BMC system log. Select Cancel to keep the BMC System log. The options
are OK and Cancel.
Caution: Any cleared information is unrecoverable. Make absolutely sure that you no longer need any data stored in the log
before clearing the BMC Event Log.