Rmc 7152 – Acnodes RMC 7152 User Manual
Page 7
14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at
RMC 7152
14” short depth server
RMC 7152
14” short depth server
7
RMC 7152
14” short depth server
1-3
Server Chassis Features
The RMC 7152 is built on the 1U rackmount server chassis. The following is a general outline of the main features of the
chassis.
System Power
For the RMC 7152, the chassis includes a single 520W power supply.
Serial ATA Subsystem
The chassis was designed to support two SATA hard drives. The SATA drives are hot-swappable units.
Note: The operating system you use must have RAID support to enable the hot- swap capability of the SATA drives.
Control Panel
The control panel provides important system monitoring and control information. LEDs indicate power on, network activity,
hard disk drive activ- ity and system overheat conditions. The control panel also includes a main power button and a system
reset button.
Rear I/O Panel
The rear I/O panel accommodates one expansion card slot, one COM port (another is internal), two USB ports, PS/2 mouse
and keyboard ports, a graphics port and two Gb Ethernet ports.
Cooling System
The chassis has an innovative cooling design that features two 10-cm blower system cooling fans. The blower fans plug into a
chassis fan header on the serverboard. A fan speed control setting in BIOS allows fan speed to be determined by system
temperature.
1.4 Contacting Acnodes
HEADQUARTERS
Address:
Acnodes Corp.
661 Brea Canyon Rd.
Walnut, CA 91789
Tel:
(909) 598-7388
Fax:
(909) 598-0218
info@acnodes.com
Website:
www.acnodes.com