Pc 5150, Rmc 7152 – Acnodes RMC 7152 User Manual
Page 34
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at
PC 5150
15-inch touch panel PC
34
RMC 7152
14” short depth server
14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
Onboard Speaker (SP1)
The onboard speaker provides audible
indications for carious beep codes. See
the table on the right for pin definitions.
Power LED/Speaker
On the JD1 header, pins 1-3 are for a
power LED and pins 4-7 are for the
speaker. See the table on the right
for speaker pin definitions.
Note: The speaker connector pins
are for use with an external speaker.
If you wish to use the onboard
speaker, you should close pins 6-7
with a jumper.
SGPIO Headers
Two SGPIO (Serial General Purpose
Input/Output) headers are included
on the serverboard. These headers are
used to communicate with the System
Monitoring chip on the backplane and
provide a serial interface to the SATA
ports. See the table on the right for
pin definitions.
I-Button
An onboard I-Button, located next to
USB ports 2~3, is a 1-wire computer
chip enclosed in a durable stainless
steel can. The I-Button stores instr-
uctions and allows the HostRAID to
operate with Mega-RAID firmware.