Rmc 7152 – Acnodes RMC 7152 User Manual
Page 31
14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at
RMC 7152
14” short depth server
RMC 7152
14” short depth server
31
RMC 7152
14” short depth server
Power Fail LED
The Power Fail LED Connection is located on
pins 5 and 6. Refer to the table on the right for
pin definitions.
Overheat LED (OH)
Conneect an LED to the OH connection on pins
7 and 8 of JF1 to provide advanced warning of
chassis overheating. Refer to the table on the right
for pin definitions.
NIC2 (LAN2) LED
The LED Connections for LAN2 are on pins 9 and
10 of JF1. Attatch LAN LED cables to display
network activity. See the table on the right for pin
definitions.
NIC1 (LAN1) LED
The LED connections for LAN1 are on pins 11 and
12 of JF1. Attatch LAN LED cables to display network
activity. See the table on the right for pin definitions.
HDD LED
The HDD LED connection is located on pins 13 and
14 of JF1. Attatch the hard drive LED cable here to
display disk activity (for any hard drives on the system.
Including the Serial ATA and IDE). See the table on the
right for pin definitions.