Acnodes RMC 7152 - Manual (Page 49)

14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at www.acnodes.com.
RMC 7152
14” short depth server
RMC 7152
14” short depth server
49
RMC 7152
14” short depth server
XBOOT Features
Quick Boot
If Enabled, this option will skip certain tests during POST to reduce the time needed for system boot. The options are Enabled
and Disabled.
Quiet Boot
This option allows the bootup screen options to be modified between POST mes- sages or the OEM logo. Select Disabled to
display the POST messages. Select Enabled to display the OEM logo instead of the normal POST messages. The op- tions
are Enabled and Disabled.
AddOn ROM Display Mode
This sets the display mode for Option ROM. The options are Force BIOS and Keep Current.
Bootup Num-Lock
This feature selects the Power-on state for Numlock key. The options are Off and On.
PS/2 Mouse Support
This feature enables support for the PS/2 mouse. The options are Disabled, Enabled and Auto.
Wait For 'F1' If Error
This forces the system to wait until the 'F1' key is pressed if an error occurs. The options are Disabled and Enabled.
Hit 'Del' Message Display
This feature displays "Press DEL to run Setup" during POST. The options are
Enabled and Disabled.
Watch Dog Function
If enabled, the Watch Dog Timer will allow the system to reboot when it is inactive for more than 5 minutes. The options are
Enabled and Disabled.
Restore on AC Power Loss
Use this feature to set the power state after a power outage. Select Power-Off for the system power to remain off after a power
loss. Select Power-On for the system power to be turned on after a power loss. Select Last State to allow the system to
resume its last state before a power loss. The options are Power-On, Power-Off and Last State.
Interrupt 19 Capture
Interrupt 19 is the software interrupt that handles the boot disk function. When this item is set to Enabled, the ROM BIOS of
the host adaptors will "capture" Interrupt
19 at boot and allow the drives that are attached to these host adaptors to function as bootable disks. If this item is set to
Disabled, the ROM BIOS of the host adap- tors will not capture Interrupt 19, and the drives attached to these adaptors will not
function as bootable devices. The options are Enabled and Disabled.
Resume On RTC Alarm
Use this feature to set an event using the Real Time Clock (RTC) to wake the system at specified times. The options are
Enabled and Disabled.
RTC Alarm Date (Days)
This option appears if Resume On RTC Alarm is Enabled. The options are Every Day and 1 ~ 31 (corresponding to the days of
the month.)