Rmc 7152 – Acnodes RMC 7152 User Manual
Page 5
14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at
RMC 7152
14” short depth server
RMC 7152
14” short depth server
5
RMC 7152
14” short depth server
1.2 Serverboard Features
The X8DTL-i is a dual processor serverboard based upon Intel's 5500 + ICH10R chipset. Below are the main features of the
X8DTL-i.
Processor
The X8DTL-i supports single or dual two Intel® 5500 Series processors in LGA1366 sockets. Please refer to our
web site for a complete listing of supported processors (.
Memory
The X8DTL-i has six 240-pin DIMM slots that can support up to 24 GB of ECC registered DDR3-1333/1066/800
SDRAM.
Serial ATA
An on-chip (ICH10R) SATA controller is integrated into the X8DTL-i to provide a six-port, 3 Gb/sec SATA sub-
system, which is RAID 0, 1, 5 and 10 supported. The SATA drives are hot-swappable units. For more information on SATA
HostRAID confi guration, please refer to the Intel SATA HostRAID User's Guide posted on our website at http://
.
Note: You must have RAID set up to enable the hot-swap capability of the SATA drives.
PCI Expansion Slots
The X8DTL-i has two PCI Express 2.0 x8 slots, one PCI Express 2.0 x4 slot, one PCI Express x4 slot and two PCI
33 MHz slots. The PCI-E x8 (in a x16 slot) may be populated with a riser card (included).
Backpanel Ports
Onboard I/O backpanel ports include one COM port, a VGA port, two USB ports, PS/2 mouse and keyboard ports
and two Gigabit LAN (NIC) ports.
Other Features
Other onboard features that promote system health include voltage monitors, a chassis intrusion header, auto-
switching voltage regulators, chassis and CPU overheat sensors, virus protection and BIOS rescue.