Rmc 7152 – Acnodes RMC 7152 User Manual
Page 35
14628 Central Blvd,
Chino, CA91710
tel:909.597.7588, fax:909.597.1939
© Copyright 2011 Acnodes, Inc.
All rights reserved. Product description and product specifications
are subject to change without notice. For latest product information,
please visit Acnodes’ web site at
RMC 7152
14” short depth server
RMC 7152
14” short depth server
35
RMC 7152
14” short depth server
Lan 1/2 (Ethernet Ports)
Two gigabit Ethernet ports (deisnated
LAN1 and LAN2) are located beside the
VGA port on the I/O backplane. These
ports accept RJ45 type cables.
Power SMB (PC) Header
The power system management bus
header monitors power supply, fan
and system temperatures. See the
table on the right for pin definitions.
IPMB
IPMB is a System Management Bus
header for IPMP 2.0. Connect the app-
ropriate cables here to use the IPMB
connection on your system.
Overheat LED/Fan Fall (JOH1)
The JOH1 header connects to an LED
indicator to provide warnings of chassis
overheating or fan failure. This LED will
blink when a fan failure occurs. Refer to
the table on right for pin definitions.
Unit Identifier Button
A Unit Identifier (UID) button is located
next to the Fan 6 Header. When you push
the UID button, both Rear UID and Front
Panel UID Indicators will illuminate. Push
it again to turn off both indicators. These
UID Indicators provide easy identification
of a system unit that may be in need of
service.