Panasonic KX-TS4300B - Manual (Page 24)

Preparation
24 For assistance, please visit http://www.panasonic.com/phonehelp
Date and time
Set the correct date and time. When you
play back a message from the
answering system (see “Listening to
messages” on page 60), the unit
announces the day and time it was
recorded.
Important:
L
Make sure that the unit is in standby
mode.
1
Press {MENU/SET}.
2
Select “Phone Setup”, then press
{
MENU/SET}.
3
Select “Date & Time”, then press
{
MENU/SET}.
4
Enter the current year by selecting 2
digits, then press {MENU/SET}.
Example: 2006
{
0}{6}
L
You can set the year 2000 to 2099.
5
Enter the current month and day by
selecting 2 digits for each, then press
{
MENU/SET}.
Example: August 15
{
0}{8} {1}{5}
6
Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each, then press
{
MENU/SET}.
Example: 9:30
{
0}{9} {3}{0}
7
Select “A” (AM) or “P” (PM), then
press {MENU/SET}.
8
Press and hold {MENU/SET} to
return to standby mode.
Note:
L
To return to the previous menu, press
{
<} .
L If you make a mistake when entering
the date and time, press {<} or
{
>} to move the cursor, then make
the correction.
Dialing mode
If you cannot make calls, change this
setting depending on your telephone line
service. The default setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary pulse dial service.
Important:
L
Make sure that the unit is in standby
mode.
1
Press {MENU/SET}.
2
Select “Phone Setup”, then press
{
MENU/SET}.
3
Select “Tone/Pulse”, then press
{
MENU/SET}.
4
Select the desired setting, then press
{
MENU/SET}.
5
Press and hold {MENU/SET} to
return to standby mode.
Note:
L
To return to the previous menu, press
{
<} .
➔Date & Time
Auto Mute
Tone/Pulse
[V/^]:Scroll
➔Tone/Pulse
Flash Time
Hold Reminder
[V/^]:Scroll
Tone/Pulse
=Tone
[SET]:Save
[V/^]:Change
KXT4300_OI.book Page 24 Friday, September 1, 2006 8:51 AM