Panasonic KX-TS4300B - Manual (Page 65)

Voice Mail Service
For assistance, please visit http://www.panasonic.com/phonehelp 65
Voice Mail Service
Using Voice Mail service
Voice Mail is an automatic answering
service offered by your telephone
service provider. After you subscribe to
this service, the telephone service
provider’s Voice Mail system will answer
calls for you when you are unavailable to
answer the phone or when your line is
busy. Messages are recorded by the
telephone service provider, not your
telephone.
Important:
L
To use the Voice Mail service provided
by your telephone service provider
rather than the unit’s answering
system, turn off the answering system
(see “Turning the answering system
on/off ” on page 57).
Message waiting
If you subscribe to the Voice Mail
service, the display will flash when you
have unretrieved messages waiting.
After retrieving the message, the
indicator will be deleted.
Display message waiting
Turn on or off the current MSGW
indicators on the display.
Important:
L
Make sure that the unit is in standby
mode.
1
Press {MENU/SET}.
2
Select “Advanced Setup”, then
press {MENU/SET}.
3
Select “Display MSGW”, then press
{
MENU/SET}.
4
Select the desired setting, then press
{
MENU/SET}.
5
Press and hold {MENU/SET} to
return to standby mode.
Note:
L
To return to the previous menu, press
{
<} .
Clear message waiting
Important:
L
Make sure that the unit is in standby
mode.
1
Press {MENU/SET}.
2
Select “Advanced Setup”, then
press {MENU/SET}.
3
Select “Clear MSGW”, then press
{
MENU/SET}.
4
Select “Yes?”, then press
{
MENU/SET}.
L
To cancel, select “No?”, then press
{
MENU/SET}.
5
Press and hold {MENU/SET} to
return to standby mode.
Note:
L
To return to the previous menu, press
{
<} .
➔Display MSGW
Clear MSGW
Area Codes
[V/^]:Scroll
03:45P 02/23 MON
EXT 11
CID:100/198 MSGW
TAD:12/26 1 34
Display MSGW
=Off
[SET]:Save
[V/^]:Change
➔Clear MSGW
Area Codes
Reset All
[V/^]:Scroll
Clear MSGW
Yes?
[SET]:Clear
[V/^]:Change
KXT4300_OI.book Page 65 Friday, September 1, 2006 8:51 AM