Panasonic KX-TS4300B - Manual (Page 54)

Answering system
54 For assistance, please visit http://www.panasonic.com/phonehelp
Note:
L
To return to the previous menu, press
{
<} .
L
When the Automated Attendant
System is turned on, the display
shows “AA Mode”.
Automated Attendant System answer
delay
This setting changes the amount of time
the phone waits before playing the
greeting message. After the selected
amount of time passes, the phone plays
the greeting message.
Important:
L
Make sure that the unit is in standby
mode.
1
Press {MENU/SET}.
2
Select “AA/TAD Setup”, then press
{
MENU/SET}.
3
Select “AA Answer Delay”, then
press {MENU/SET}.
4
Select the desired setting, then press
{
MENU/SET}.
5
Press and hold {MENU/SET} to
return to standby mode.
Note:
L
To return to the previous menu, press
{
<} .
Setting the Automated
Attendant System day and
night times
The Automated Attendant System day
(or night) greeting message will begin
playing at the time programmed as day
until the time you programmed as night,
and vice versa.
Important:
L
Make sure that the unit is in standby
mode.
1
Press {MENU/SET}.
2
Select “AA/TAD Setup”, then press
{
MENU/SET}.
3
Select “Day Time” or “Night
Time
”, then press {MENU/SET}.
4
Enter the hour and minute, then
press {MENU/SET}.
5
Select “A” (AM) or “P” (PM), then
press {MENU/SET}.
6
Press and hold {MENU/SET} to
return to standby mode.
Note:
L
To return to the previous menu, press
{
<} .
L
If you make a mistake when entering
the date and time, press
{
<} or {>} to move the cursor,
then make the correction.
03:45P 02/23 MON
EXT 11 AA Mode
CID:100/198 MSGW
TAD:12/26 1 34
➔AA Answer Delay
Day Time
Night Time
[V/^]:Scroll
AA Answer Delay
=06 Seconds
[SET]:Save
[V/^]:Change
➔Day Time
Night Time
TAD Ans. Delay
[V/^]:Scroll
Day Time
[SET]:Save
[DIGIT]:Change
Day Time
[SET]:Save
[V/^]:Change
9:00A =
=09:00
KXT4300_OI.book Page 54 Friday, September 1, 2006 8:51 AM