Panasonic KX-TS4300B - Manual (Page 52)

Programming
52 For assistance, please visit http://www.panasonic.com/phonehelp
Programming the
advanced setup
features
Line group
You can choose to leave LINE4
unconnected at particular extensions or
to connect private lines (constructing a
line group) at particular extensions.
To set up the line group, see “Setting up
the line group” on page 20.
Important:
L
Make sure that the unit is in standby
mode.
1
Press {MENU/SET}.
2
Select “Advanced Setup”, then
press {MENU/SET}.
3
Select “Line Group”, then press
{
MENU/SET}.
4
Select the desired setting, then press
{
MENU/SET}.
5
Press and hold {MENU/SET} to
return to standby mode.
Note:
L
To return to the previous menu, press
{
<} .
L Transferring a call to a different line
group through line 4 is not allowed.
Reset all
Return all features to default settings,
and all numbers set to speed dial are
erased. You cannot undo the “Reset All”
command.
Important:
L
Make sure that the unit is in standby
mode.
1
Press {MENU/SET}.
2
Select “Advanced Setup”, then
press {MENU/SET}.
3
Select “Reset All”, then press
{
MENU/SET}.
4
Select “Yes?”, then press
{
MENU/SET}.
L
To cancel, select “No?”, then press
{
MENU/SET}.
5
Press and hold {MENU/SET} to
return to standby mode.
Note:
L
To return to the previous menu, press
{
<} .
➔Line Group
Display MSGW
Clear MSGW
[V/^]:Scroll
Line Group
=Line 04
[SET]:Save
[V/^]:Change
➔Reset All
Ringer On/Off
Ringer Type
[V/^]:Scroll
Reset All
Yes?
[SET]:Reset
[V/^]:Change
KXT4300_OI.book Page 52 Friday, September 1, 2006 8:51 AM