Panasonic KX-TS4300B - Manual (Page 47)

Caller ID Service
For assistance, please visit http://www.panasonic.com/phonehelp 47
Storing caller information
into the speed dialer
Important:
L
Make sure that the unit is in standby
mode.
1
Press {CALLER ID}.
2
Select the desired item, then press
{
MENU/SET}.
3
Select “Copy To SPD”.
L
To edit the phone number, press
{
>} repeatedly until the phone
number is shown in the desired
format. ({<} does not work.)
4
Press {MENU/SET}.
5
Press the speed dial button ({1} to
{
16}).
OR
Press {LOWER}, then press the
speed dial button ({1} to {16}).
6
Press {CALLER ID} to return to
standby mode.
Note:
L
To return to the previous menu, press
{
<} .
L
If the speed dial has already stored
the content, you can select whether it
should be replaced or not. To replace
current content, select “Yes?”, then
press {MENU/SET}. To keep original
content, select “No?”, then press
{
MENU/SET}.
Erasing selected caller
information
Important:
L
Make sure that the unit is in standby
mode.
1
Press {CALLER ID}.
2
Select the desired item, then press
{
ERASE}.
3
Select “Yes?”, then press {ERASE}
or {MENU/SET}.
L
To cancel, select “No?”, then press
{
MENU/SET}.
4
Press {CALLER ID} to return to
standby mode.
Note:
L
To return to the previous menu, press
{
<} .
Erasing all caller
information
Important:
L
Make sure that the unit is in standby
mode.
1
Press {CALLER ID}.
2
Press {ERASE}.
3
Select “Yes?”, then press {ERASE}
or {MENU/SET}.
L
To cancel, select “No?”, then press
{
MENU/SET}.
4
Press {CALLER ID} to return to
standby mode.
Note:
L
To return to the previous menu, press
{
<} .
KXT4300_OI.book Page 47 Friday, September 1, 2006 8:51 AM