Panasonic KX-TS4300B - Manual (Page 51)

Programming
For assistance, please visit http://www.panasonic.com/phonehelp 51
Programming the phone
setup features
Prime line
If the selected line is ringing or all lines
are idle, it has the highest priority to be
picked up when you lift the handset or
press {SP-PHONE}.
Important:
L
Make sure that the unit is in standby
mode.
1
Press {MENU/SET}.
2
Select “Phone Setup”, then press
{
MENU/SET}.
3
Select “Prime Line”, then press
{
MENU/SET}.
4
Select the desired setting, then press
{
MENU/SET}.
5
Press and hold {MENU/SET} to
return to standby mode.
Note:
L
To return to the previous menu, press
{
<} .
Handsfree mode
You can use this phone in “Handsfree”
mode by using the speakerphone on the
unit or a headset (optional).
This feature specifies a mode to be
automatically selected each time you
press a line key with the handset on the
cradle.
Important:
L
Make sure that the unit is in standby
mode.
1
Press {MENU/SET}.
2
Select “Phone Setup”, then press
{
MENU/SET}.
3
Select “Handsfree Mode”, then
press {MENU/SET}.
4
Select the desired setting, then press
{
MENU/SET}.
5
Press and hold {MENU/SET} to
return to standby mode.
Note:
L
To return to the previous menu, press
{
<} .
L If you set “Handsfree” mode to
“Headset” but do not actually have a
headset connected, speakerphone will
be used.
➔Prime Line
Speed Dial
Language
[V/^]:Scroll
Prime Line
=Line1
[SET]:Save
[V/^]:Change
➔Handsfree Mode
Prime Line
Speed Dial
[V/^]:Scroll
Handsfree Mode
=Headset
[SET]:Save
[V/^]:Change
KXT4300_OI.book Page 51 Friday, September 1, 2006 8:51 AM