Panasonic KX-TS4300B - Manual (Page 37)

Speed Dialer
For assistance, please visit http://www.panasonic.com/phonehelp 37
Erasing a stored entry
Important:
L
Make sure that the unit is in standby
mode.
1
Press {MENU/SET}.
2
Select “Phone Setup”, then press
{
MENU/SET}.
3
Select “Speed Dial”, then press
{
MENU/SET}.
4
Select “Edit/View SPD”, then
press {MENU/SET}.
5
Press the speed dial button ({1} to
{
16}).
OR
Press {LOWER}, then press the
speed dial button ({1} to {16}).
6
Press {ERASE}.
7
Select “Yes?”, then press {ERASE}
or {MENU/SET}.
L
To cancel, select “No?”, then press
{
MENU/SET}.
8
Press and hold {MENU/SET} to
return to standby mode.
Note:
L
To return to the previous menu, press
{
<} .
Calling someone with the
speed dialer
If speed dial preference is set to
“CO Call”
Press the desired speed dial button ({1}
to {16}).
OR
Press {LOWER}, then press the desired
speed dial button ({1} to {16}).
If speed dial preference is set to
“Intercom DSS”
1
Lift the handset or press
{
SP-PHONE} or a line button.
2
Press the desired speed dial button
({1} to {16}).
OR
Press {LOWER}, then press the
desired speed dial button ({1} to
{
16}).
If speed dial preference is set to
“Preview Memory”
1
Press the desired speed dial button
({1} to {16}).
OR
Press {LOWER}, then press the
desired speed dial button ({1} to
{
16}).
L
You can review the entries by
pressing {V} or {^}.
2
Lift the handset or press
{
SP-PHONE} or a line button.
➔Speed Dial
Language
Extension No.
[V/^]:Scroll
➔Edit/View SPD
SPD Preference
[V/^]:Scroll
Edit/View SPD
Select SPD Key
KXT4300_OI.book Page 37 Friday, September 1, 2006 8:51 AM