Panasonic KX-TS4300B - Manual (Page 59)

Answering system
For assistance, please visit http://www.panasonic.com/phonehelp 59
Playing back the greeting
message
Important:
L
Make sure that the unit is in standby
mode.
1
Press {REC/ERASE ALL}.
2
Select “TAD Ans-OGM”, then press
{
MENU/SET}.
3
Select “Play”, then press
{
MENU/SET}.
4
To stop playing, press {MENU/SET}
while the greeting message is
playing.
5
Press {REC/ERASE ALL} to return
to standby mode.
Note:
L
To return to the previous menu, press
{
<} .
Recording your greeting
message
You can record your own greeting
message (up to 90 seconds) that is
played when the answering system
answers a call. If you do not record a
greeting message, a pre-recorded
greeting message is used.
If the message memory becomes full,
the pre-recorded greeting message
(“Hello, we are not available now. Thank
you for calling. Memory full.”) will be
announced to callers.
Important:
L
Make sure that the unit is in standby
mode.
1
Press {REC/ERASE ALL}.
2
Select “TAD Ans-OGM”, then press
{
MENU/SET}.
3
Select “Re-Record”, then press
{
MENU/SET}.
4
After the unit beeps, speak clearly
about 20 cm (8 inches) away from
the MIC.
5
To stop recording, press
{
MENU/SET}.
L
The greeting message is played
back.
6
Press {REC/ERASE ALL} to return
to standby mode.
Note:
L
To return to the previous menu, press
{
<} .
L If there is no sound recorded for a
while, recording mode will end.
Erasing your greeting
message
Important:
L
Make sure that the unit is in standby
mode.
1
Press {REC/ERASE ALL}.
2
Select “TAD Ans-OGM”, then press
{
MENU/SET}.
TAD Operation
➔TAD Ans-OGM
AA Day-OGM
[V/^]:Scroll
TAD Ans-OGM
[SET]:Play
TAD Operation
➔TAD Ans-OGM
AA Day-OGM
[V/^]:Scroll
TAD Ans-OGM
TAD Operation
➔TAD Ans-OGM
AA Day-OGM
[V/^]:Scroll
[SET]:Re-Record
KXT4300_OI.book Page 59 Friday, September 1, 2006 8:51 AM