Panasonic KX-TS4300B - Manual (Page 64)

Answering system
64 For assistance, please visit http://www.panasonic.com/phonehelp
4
Select the desired setting, then press
{
MENU/SET}.
5
Press and hold {MENU/SET} to
return to standby mode.
Note:
L
To return to the previous menu, press
{
<} .
For Voice Mail service subscribers
If you subscribe to a flat-rate service
package that includes Caller ID, Call
Waiting, Voice Mail, and unlimited local/
regional/long distance calls, please note
the following:
L
To use the Voice Mail service provided
by your telephone service provider
rather than the unit’s answering
system, turn off the answering system
(see “Turning the answering system
on/off ” on page 57).
L To use this unit’s answering system
rather than the Voice Mail service
provided by your telephone service
provider, please contact your
telephone service provider to
deactivate your Voice Mail service.
If your telephone service provider
cannot do this:
– Set this unit’s “TAD Ans. Delay”
setting so that this unit’s answering
system answers calls before the
Voice Mail service of your telephone
service provider does (see “TAD
answer delay” on page 57). It is
necessary to check the time required
to activate the Voice Mail service
provided by your telephone service
provider before changing this
setting.
– Change the time of the Voice Mail
service so that the answering
system can answer the call first. To
do so, consult your telephone
service provider.
Caller’s message length
You can change the maximum message
recording time allotted to each caller.
The default setting is “Unlimited”.
“Greeting Only”: The unit plays the
greeting message (“Hello, we are not
available now. Thank you for calling.”)
but does not record caller messages.
“1 Minute”: The caller can record the
message up to 1 minute.
Important:
L
Make sure that the unit is in standby
mode.
1
Press {MENU/SET}.
2
Select “AA/TAD Setup”, then press
{
MENU/SET}.
3
Select “Message Length”, then
press {MENU/SET}.
4
Select the desired setting, then press
{
MENU/SET}.
5
Press and hold {MENU/SET} to
return to standby mode.
Note:
L
To return to the previous menu, press
{
<} .
Toll Saver
=Off
[SET]:Save
[V/^]:Change
➔Message Length
Call Screening
Intercept Call
[V/^]:Scroll
Message Length
=Unlimited
[SET]:Save
[V/^]:Change
KXT4300_OI.book Page 64 Friday, September 1, 2006 8:51 AM