Alpine SEA-8081 - Manual (Page 112)

112
English
Advanced
Operation
Valet Information
The SEC-8063 allows you check the valet
status of the security system as well as
change the Coded Disarm password.
Turn the ignition switch to the ON position.
The clock display will appear on the display.
Turn the Disarm/Valet switch to the ON
position.
Press the MODE button within 10 seconds.
Each press of the button will advance the
mode as follows:
→
DATE/TIME SETUP
→
TRIPPED
SENSOR SETUP
→
FAULTY SENSOR
INDICATION
→
SECURITY PROGRAM-
MING
→
VALET INFORMATION
→
BAT-
TERY CHECK
→
Select VALET INFORMATION.
Note: The display mode will return to the
clock display after 30 seconds of
inactivity.
1
ACC
OFF
ON
RUN
2
VALET
3